Laser Pointer has several payment terms

Laser Pointer has several payment terms.
Cleaning blade: Clean knife blade and the composition of the powder is very similar, but with a slightly harder bit of polyurethane rubber, of course, its function is not the same knife with a powder, clean the rubber blade and the blade is very important to the state, for a long time After the deformation of the rubber will be using the emulsion, often a gap edge, so that the cleaning blade can not be used again, will have a print product on the local end of the light-colored gray or black vertical lines. Charge roller: roller charging the surface layer often due to prolonged use of adhesive toner, and paper and other toner additives, but also wear and tear, these phenomena can cause the bottom ash or black spots and other print materials, filling toner before use vacuumed or gently wipe with a soft cloth, be sure to clean the surface as much as possible. Background scattering: refers to the text or unwanted lines around the black specks, toner from the magnetic roller coating or bad cause. Drum overheating (referring to a sense of high) may also cause this defect. Wave background (tiger grouper): wavy black version in white or white on black version or in the form of half-tone version. Several more kinds of payment method of Laser Pointer will be added for this online store of Laser Pointer .
Usually magnetic roller sleeve coating defects or due to prolonged low-density printing, magnetic bond caused by the magnetic roller sleeve. Hollow words: refers to the text or images is missing strokes on the reasons: toner itself is the problem. Dark pink with bad. Magnetic roller coating problems. Print media over the surface of the light, perfect. Paper with the negative. Irregular vertical black spots: the deformation caused by the sealing of the waste toner smears scattered. As the accumulation of too much toner on the magnetic roller, causing leakage of powder. Coloration: with a variety of factors: the toner itself is the problem. Toner, magnetic roller with the problem. Flour knife aging. Magnetic roller wear. Drums to life. High humidity or moisture absorption media. The detailed information of Laser Pointer contains the ordering quantity of Laser Pointer .
Bottom ash: bottom ash refers to prints blank zone in the mist toner, but also with a variety of factors: aging scraper. Charge roller fouling. Toner problem. Drum fatigue, to life. Low temperature and dry environment. Print media bad. Charge roller wear. Fixing is not strong: refers to the printed text or images on the product that is out of touch. The reasons are: toner softening point higher than the machine's fusing temperature. Print media too thick or too light surface. Before cleaning the printer, be sure to carefully read the printer user manual to follow any special procedures and warnings. Therefore, a large number of particles in the same excitation of coherent radiation field produced by the stimulated emission light is coherent.